[Yaaarc] Cheap/Free CAD Packages

[James Ronald]

Wow, thanks for the wonderful links.  You can pick up a copy of TurboCad Deluxe version 12 for 49.00 mail order.  I have a seen it even cheaper on clearance at CompUSA for $29.00.  My router, PBX, MythTV and NAS (Linkstation & Kuro box) servers all run Linux.  My desktops still run Windows XP for now although I need to try Suse 10.1.  Again it's just the learning cure issue that need to work through but there are only so many hours in a day and more interesting things to work on.

Jim
          
  ----- Original Message ----- 
  From: Neal Probert 
  To: yaaarc at stilyagi.org 
  Sent: Wednesday, August 23, 2006 9:46 AM
  Subject: [Yaaarc] Cheap/Free CAD Packages


  Most of us can't afford things like AutoCAD, Inventor, OrCAD, TurboCAD and 
  various other packages for electrical or mechanical design.  But there are 
  cheap or free alternatives.

  Most of these are already available as Debian packages under Linux and easy 
  to download and install.

  Electronic Design
  -----------------
  Gnu EDA (www.geda.seul.org) is another electronics design package for free, 
  and integrates with SPICE for analog circuit simulation.  Here's a good open 
  source page for electronic circuit design:

  http://www.opencollector.org/

  There is a package called PCB (http://pcb.sourceforge.net/), for pcb board 
  layout, that Paul Haas used on Linux to design the Y3MD.  It's not the same 
  thing as PCB123 (www.pcb123.com) which includes Windows/Mac software to 
  design your board and then have them print the boards for you.

  Mechanical Design
  -----------------
  For Linux, there are quite a few 2D CAD packages, some free like Qcad 
  (http://www.ribbonsoft.com/qcad.html).  For 3D CAD or Modeling, try Blender 
  (www.blender.org).

  http://www.linuxlinks.com/Software/Graphics/CAD/

  LEGO Digital Designer is package for you to design your own LEGO things and 
  you can order parts kit to make it from your design.  Otherwise, here's:

  http://www.ldraw.org/

  Software Design
  ---------------
  For software, there's plenty packages on Linux.  Editors range from Emacs 
  and VI to many, many others.  As for IDEs, some very good ones in Eclipse, 
  Komodo, KDevelop and Guile.  Design packages like Umbrello, Argouml, Gaphor, 
  Dia and autodia mostly work in UML.

  Btw, Open Office 2.0 is as good or better than Microsoft Office for office 
  type stuff.  And a hell of a lot cheaper!

  bellfours at aol.com wrote:
  > James,
  > I could try out the TurboCAD. I have done some work using an older version of TurboCAD.
  > If the newer TurboCAD is there for me to try it out, maybe I could help you out. 
  > If your TurboCAD in your laptop, please make sure there is an external mouse for me to use because it is too difficult to use those finger or internal mouse to do CAD work. 
  > Since I work for Yazaki, I use CAD software all the time. 
  > I will be coming from out of town, and I will be late, but no later than 8 pm.
  >  
  > Anthony
  >  


  -- 
            *** ProbeStar Technical Systems, LLC.  ***
         Software Engineering and Application Development

  ==// Neal W. Probert (President)       / Email: nprobert at probestar.com //
  =// Web: www.probestar.com            / Phone: 734-834-7805           //=
  // Fax:                              / Cell: 734-834-7805            //==

  "Technology is a gift of God. After the gift of life it is perhaps the 
  greatest of God's gifts. It is the mother of civilizations, of arts and of 
  sciences"
  --- Freeman Dyson Infinite in all directions
  _______________________________________________
  Yaaarc mailing list
  Yaaarc at stilyagi.org
  http://stilyagi.org/mailman/listinfo/yaaarc